Відео

i won't get mine until the end of July/first part of August. I will be doing a lot of testing and experimenting. I ordered the bundle with purifier, rotary, and conveyer..

SO, for the more "casual hobbyist", the 20 watt will work fine with maybe taking more passes to compensate the 20 watts vs the 30 watts. I'm making my "final" decision right now....

Hey thank you, based on your testing do you think or can you confirm it can cut sterling silver?

Thank you for going through the basics. A lot of other videos take for granted everyone is familiar with X-tool and the machine.

I ordered one may 30. I’m still waiting. Having this machine sure looks like a game changer.

Wow such a nice video! Could you please share the settings for the apple plastic? Don’t want to destroy my AirTags 😅

Just got my shipping email today... be here on the 27th yay...

Great job. Have you heard about the curved surface capability? When will it be available?

I just want to say that your reviews are incredible and I find it bizarre they aren't more watched.

Great job David. Very informative. Hell of a machine, but $4-K is expensive..

First like

Would be no nice to see the software setup😮

@Neo7CNC I am looking for a low cost laser engraver to do deep engraving on 7075 aluminum, do you have any recommendations??? being that I am a "poor with a very limited income". I need as low of an cost as possible, but also need a machine that will do the job.

Geez, what a helpful tutorial.

Thank you is all I can say. I just bought a 100w Fiber Laser to do Cold Rolled Steel (overkill, I know) and have had no luck with anything I tried yet. But, this video will help with my getting the setting down for practice.

Does it work with Mac?

Great content. Thank you for sharing

9 “I watched till thrones were put in place, And the Ancient of Days was seated; His garment was white as snow, And the hair of His head was like pure wool. His throne was a fiery flame, Its wheels a burning fire; 10 A fiery stream issued And came forth from before Him. A thousand thousands ministered to Him; Ten thousand times ten thousand stood before Him. The court was seated, And the books were opened. 11 “I watched then because of the sound of the pompous words which the horn was speaking; I watched till the beast was slain, and its body destroyed and given to the burning flame. 12 As for the rest of the beasts, they had their dominion taken away, yet their lives were prolonged for a season and a time. 13 “I was watching in the night visions, And behold, One like the Son of Man, Coming with the clouds of heaven! He came to the Ancient of Days, And they brought Him near before Him. 14 Then to Him was given dominion and glory and a kingdom, That all peoples, nations, and languages should serve Him. His dominion is an everlasting dominion, Which shall not pass away, And His kingdom the one Which shall not be destroyed. Daniel 7:9-14 10 Jesus answered and said to him, “Are you the teacher of Israel, and do not know these things? 11 Most assuredly, I say to you, We speak what We know and testify what We have seen, and you do not receive Our witness. 12 If I have told you earthly things and you do not believe, how will you believe if I tell you heavenly things? 13 No one has ascended to heaven but He who came down from heaven, that is, the Son of Man who is in heaven. 14 And as Moses lifted up the serpent in the wilderness, even so must the Son of Man be lifted up, 15 that whoever believes in Him should not perish but have eternal life. 16 For God so loved the world that He gave His only begotten Son, that whoever believes in Him should not perish but have everlasting life. 17 For God did not send His Son into the world to condemn the world, but that the world through Him might be saved.18 “He who believes in Him is not condemned; but he who does not believe is condemned already, because he has not believed in the name of the only begotten Son of God (YHVH, El Shaddai, Adonai, God of Jacob, Isaac, and Abraham). John 3:10-18

I cut 1/8" thick steel with my 60w MOPA and my 50w

Very cool. I hope you’ll make more videos on it.

I have my deposit in. Hope it lives up to expectations. xTool is being tight-lipped about letting reviewers reveal much about the machine.

nice video

Is this significantly different than the more expensive cloudray or the higher cost split version of this laser?

love to see the production version...

I have been shopping for a fiber and doing research before a purchase. Com doesn't possess stellar reviews on Amazon.

hi sir this machine 20w or 60w?

Love your video, and as a first-time viewer, I subscribed! 👍 I have just a few questions. But, briefly, allow me to explain where I’m at. I've had two bad experiences with WeCreat. The first one had too many defective parts and poor support, not worth going over. The second WeCreat I just returned today. The most obvious issue is cutting or engraving accurately with WeCreat; it is way off unless your products are dead center of the laser. Even with camera calibration, WeCreat isn’t accurate whatsoever. They won’t acknowledge this as an issue due to the fisheye effect of the camera. Additionally, most UA-cam Content Creators sponsored by WeCreat (99.9%) will not disclose the accuracy of the laser. So, I'm torn between xTool S1 40 watt and LaserMACTIC MK2 10/30 Watt. Non-sponsored reviews for the MK2 have been outstanding, with only one common issue across the board: the fan never shuts off when the power is on in non laser mode. However, every single aspect of the MK2 has received overwhelmingly positive feedback. As for the S1, a common con is XTool’s poorly rated support. My main goal using a laser is batch engraving or intricate artwork if I had the Conveyor. I was told the MK2 will have a pass-through, but not until sometime at the end of this year. If I go with the S1, how difficult is it to do batch engraving since there is no camera? If I have several pieces of keychains on the honeycomb tray, do I need to move the laser head to each piece for precise engraving during setup? Also, what is your opinion on the MK2? Thank you.

Man, I just got done dissecting a set of these, wiring up the motors to a standard standalone stepper driver, and through trial and error figuring out the settings, didn't realize someone else has already done similar with these Robo cylinder kits! I will definitely say either your voltage or current aren't right in that video as these things run much quieter and smoother when run correctly!

A few clarifications. The grayscale depth map gives you a possible 256 shades of gray. 3D slice mode assigns each shade a slice. Your image may or may not contain every shade, but generally speaking, cutting the number of passes down under 256 could result in you missing some "slices" which could affect your image quality. If you didn't want as deep an image, you could increase the speed or decrease the power instead of decreasing the passes. Increasing the passes beyond 256 means that some layers may be duplicated which will also increase your depth but may affect your image quality. Knowing the beam dot size of the lens you are using is also very important. Your beam dot size obviously affects your line interval. There are beam dot size calculators on the web. Lenses that can do large areas (150x150) also have a greater focus sweet spot for deeper images, but will produce less DPI because of their larger spot size, and will take longer removing material because of their decreased energy density. Lenses that have small (70x70) area will produce higher DPI with a smaller spot size, the smaller spot energy density is also more powerful and will remove material faster, however, the smaller line interval will take more time to engrave. There is always a series of practice runs necessary for every image, but you will get better at guestimating. You CAN do coin dies simply by mirroring the image and inverting the color. I have successfully made 2 sided penny restamping dies that work under a 20 ton Harbor Freight shop press.

Messaged them 12 hours ago, the response I got was hi..

Great presentation and explanation. Good job..!!

That was awesome info for 20W machines and coins! Your work here shows the value of entry level machines to add production. Great work. Thanks!!

Just got my S1 love the quality and ease of use, watched several of you videos and was sold on buying XTOOL !!!! Thanks

Hi! great video. Would you mind sharing a video on the configurations on laserGRBL on how did you achive the snake and the lion picture please?

This is a portable laser engraver. What is the runtime with one charge?

going to get a wecreat but waiting on them to upgrade the laser to 40w at the price it is now, need a 40w so can do 3d deep engraving.

Great video. Am currently researching heavily for a business and your opinion and thoughts are valid and great to hear

Finally, a simple, easy to understand explanation of how this whole process works! I had no idea that 20W laser could do 15K speed, or, you could actually get deep carvings with those other settings. Many thanks for making this video (+1 sub/thumb).

Thanks for not doing an unboxing, 90% of the time i skip them. This was a great video.

Thank you for taking the time to do this. I do not have a fiber, actually looking at the ComM B4 30W and I just started getting into affinity designer. I cannot tell you how nice it is to see someone use almost exactly what I plan to. Almost "everyone" shows off with Illustrator.

How does it compare to the Bambulab p1s?

I have the same setup I wish I had more time to play with it

Hi what is the thickest it will cut on pine or ply?

Oh, the visual puns ... so groan worthy! 😂 Great demonstration, definitely on the wish list.

Just my .02; you should standardize the way you position the tags. Rolled edge up or down. Nice video and appreciate all your work. Subscribed.

Turntables are great for production work.

Why are you pronouncing "Qidi" as "Chee dee"?

This unit worth the $$ ? any problems?

If you put a static disk underneath with a exhaust gate for the finished parts, you could add a gravity fed magazine.

Thanks for your comparison and explained support value problems and fixing issues am trying to make my first purchase decisions and am getting close to taking the plunge. Nice channel will continuie to follow GOOD JOB!